GlassQuote · supply and specification
How to Measure Replacement Glass
Identify visible glass, fabricated glass and sealed-unit thickness before requesting replacement glass.
First identify what is being replaced
A single sheet, a sealed insulated unit, a sash and a complete window are different products. A double-pane unit contains two panes plus a spacer and perimeter seal; the overall thickness is more than either individual pane. If fog is between the panes, quote the complete sealed unit rather than one sheet.
| Measurement | What it means | Use |
|---|---|---|
| Visible glass | Glass visible between retaining stops or gaskets. | Rough quote only; edges are concealed. |
| Finished glass | Actual manufactured width and height of the piece or unit. | Order size once verified with clearances. |
| Frame size | Outside dimensions of the window assembly. | Whole-window planning. |
| Rough opening | Wall opening that accepts the window frame. | Installation planning; not glass size. |
Record a separate line for each opening
- Existing visible width × height can be recorded as daylight enquiry information. These are not fabrication dimensions. No dismantling or handling of damaged glass is required.
- Record quantity and location: fixed window, opening sash, door, patio panel or storefront.
- Photograph the whole frame, spacer markings, internal grids and any safety mark.
- State whether the unit has two or three panes, visible coating/tint and any known overall thickness.
- Our team must confirm concealed edges, system-specific clearances and the fabrication specification against the actual supplier drawing. No assumed glass bite or generic deduction is used.
Supply, delivery and installation are separate
GlassQuote supplies glass to a confirmed specification. The product configurator shows the available construction, dimensions and options; prices are in CAD before HST unless explicitly stated otherwise. Review the product subtotal and 13% HST separately. Delivery, special handling and any unlisted fabrication must be confirmed for the order.
Site measurement, removal, disposal, installation and finishing are contractor work. Tell us if you also need a contractor introduction so that work can be quoted separately, without adding installation twice.
GlassQuote · product supply
Request a measured-glass quote
Tell us what you need and your location. We’ll review the specification and contact you about this request. You can text photos to 647-594-4488.
Supply pricing excludes contractor installation. Delivery and handling are confirmed separately. A request does not confirm an order or appointment.
